Home > Accessories > Clearomizers >

Kanger Unitank Clearomizer
Kanger Unitank Clearomizer

Alternative Views:

Retail Price: $15.99
Special Price: $13.00

Availability:: Usually Ships in 24 Hours
Product Code: UNITANK

Select Clearomizer Color:

Description Contents

Kanger Unitank Clearomizer

The Kanger Unitank Clearomizer is an innovative clearomizer system that is designed to make vaping a breeze. This clearomizer is a bottom coil clearomizer that gives you the ability to fill it from the top while still maintaining its bottom coil status.

This clearomizer is made up of two chambers with a spring inside. When the top of the Unitank is opened the spring activates and siphons off the airflow and liquid from the bottom chamber to prevent leaking.

This is a rebuildable clearomizer meaning it can be disassembled entirely for cleaning, coil changing, and replacing parts. It is 510 threaded and compatible with eGo batteries.

Compatible Coil: Kanger Protank 2 Replacement Coil

Note: We recommend letting the liquid pass below the seal before refilling. This will help avoid any flooding or gurgling.

How To Change The Coil:
  • Turn the tank upside down and unscrew the base assembly cap from the bottom of the tank.
  • Remove the center tube and the spring from the old coil, unthread the old coil from the base cap.
  • Thread on a new coil ( do not over tighten the coil into the base, a snug fit is all you need)
  • Slide the spring back on the center shaft of the new coil, slide the center metal tube on to the center shaft over the spring.
  • Reinstall the base assembly into the tank.

How To Fill/Refill:
  • Remove the top cap from the Unitank, the spring loaded center air tube will pop up and close off the air/liquid flow to the coil
  • Fill with approximately 2.0ml-2.4ml of e-liquid by tilting the PRO Tank at a slight angle and dripping juice down the inside wall against the outer wall of tank.
  • Do not let eliquid flow into the center tube, this is the air flow tube, liquid will leak out the mouth piece.
  • Screw the top cap assembly back onto the tube, the spring loaded center tube will be pushed back in to seal the coil and open the lower chamber
  • Screw onto electronic cigarette device and you're ready to vape.
  • Let the UniTank sit for a few minutes when first filling with liquid, this will allow the liquid to absorb into the coil wicks. Firing the UniTank with a dry coil can cause burning of the wicking material and possibly ruin the coil.

Share your knowledge of this product. Be the first to write a review »

Helpful Links

Accessories > Clearomizers
e Cigs Brands > Kangertech
e Cigs Brands